Megasat SAT>IP Server User Manual download pdf (Page 10)

ENGLISH ENGLISH

4. Network Setting: 5. Software Upgrade:

Upgrading software of the SAT>IP switch/server can be done through the Web User

Interface or Internet. Users can choose updated software images from their local

hard driver and then upload to the SAT>IP switch/server.

For online upgrade, the system default is Enabled, so the SAT>IP switch/server will

automatically check whether new software is available. Also, users can click

“upgrade now!” to immediately get the latest software from the device manufacturer.

• Network Interface:

The default network interface of the SAT>IP switch/server is utilizing Ethernet

network. Users do not need to adjust the setting if the SAT>IP switch/server is

installed in the Ethernet environment.

• IP Settings:

Automatic or Static mode can be chosen by users in the function. The default

IP setting is automatic mode. The SAT>IP switch/server does not include DHCP

function, so it needs to be connected to a router or switch with DHCP function.

Once the SAT>IP switch/server is correctly connected to a device with DHCP

function, users do not need to adjust the setting.

• Time Correction:

The function is to setup appropriate time zone for the SAT>IP switch/server, so

online upgrade can be correctly conducte

Network Settings

Software Upgrade

On the other hand, using static mode is recommended for professional users only.

These professional users need to know speciﬁc information of IP, Netmask, Gateway,

and DNS.

Once the software is successfully upgraded, you can see message below in green. The

system will automatically restart once update is completed; user might need to recon-

nect to WebUI.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15

No comments

Megasat SAT>IP Server User Manual Page 10